So, if basslines need to be mono...

[Catastrophe]

Roughly at what frequency can you move to stereo?

Example: I want a sub bass sound at the low end (where subs belong obviously) and a stereo low-end synth sound on top which is high-passed to let the sub through.

Clearly it depends on what decks/needles are being used, but there must be a rough point at which it's reasonably safe to use stereo.

[polygon]

i always try to keep stuff below 200hz mono.

[Ben Kei]

You can get away with anything down to 60hz (if you're lucky/the vinyl is cut well) in Stereo but I never really go below 80Hz myself.

[Macc]

I tend to keep everything except bass and drums above 200Hz or so anyway, so I couldn't tell you

[Catastrophe]

cool. i think i only need to go down to about 140, maybe not even that low, so i should be ok.

thanks for the advice.

[Macc]

I keep em clear of that to avoid clashing with my drums

NOTHING BUT NOTHING TOUCHES MY DRUUUUUMS!!!!

[ALPHA OMEGA]

drum phile!!!

[Macc]

BITCH!