+- Subvert Central (http://subvertcentral.com/forum)
+-- Forum: Main Forums (http://subvertcentral.com/forum/forum-4.html)
+--- Forum: Audio Production and Engineering (http://subvertcentral.com/forum/forum-17.html)
+--- Thread: help setting adat outs on desk please (/thread-14614.html)
help setting adat outs on desk please - markgabba - 18th November 2004
need help setting the adat outs on my digital desk to my sound card ins??
ive never needed it cos i can record to cd but i want to start recording in cubase.
i have read the manual and can't seem to get my head round it
it doesn't seem to explain everything i need to know.. ( my knowledge on this stuff is naff though )
anyone using a digital desk with adat? should be the same kinda format for them all really.
help please
help setting adat outs on desk please - dsp - 18th November 2004
you need too connect the sync cable to stop glitches and i take it you have the optical cables?
what sound card you got?? has it got a sync connector (its usually a bnc connector)
help setting adat outs on desk please - markgabba - 19th November 2004
yes i got the echo gina and yam o1v mixer , optical cables. the connection from the sound card out to the desk in is working fine but its the desk out to the s - card in that i can't suss.
i have to assign it to the buss's on the mixer
help setting adat outs on desk please - markgabba - 19th November 2004
dsp Wrote:you need too connect the sync cable to stop glitches and i take it you have the optical cables?
what sound card you got?? has it got a sync connector (its usually a bnc connector)
no it hasn't got a sync connector
help setting adat outs on desk please - dsp - 19th November 2004
markgabba Wrote:dsp Wrote:you need too connect the sync cable to stop glitches and i take it you have the optical cables?
what sound card you got?? has it got a sync connector (its usually a bnc connector)
no it hasn't got a sync connector
ok you may need to free up one of the 8 channels to use as a sync down the fibre, im not 100 though, but you should at least be able to see the signal going out of your desk ? it may apear as a sub mix or group, i have never used an 01 with an adat card so i don't know, only a spirit 328
help setting adat outs on desk please - markgabba - 19th November 2004
cheers mate, i will carry ohn fiddling and hopefully sort it
help setting adat outs on desk please - dsp - 19th November 2004
coolio, adat is a bit or a mare but im sure you get it sorted
help setting adat outs on desk please - markgabba - 19th November 2004
tell me about it hehe i have no patiance with this stuff
help setting adat outs on desk please - subvert - 19th November 2004
dsp Wrote:you need too connect the sync cable to stop glitches and i take it you have the optical cables?
what sound card you got?? has it got a sync connector (its usually a bnc connector)
nah you dont
adat incorporates syncing through the lightpipe cable
help setting adat outs on desk please - subvert - 19th November 2004
dsp Wrote:ok you may need to free up one of the 8 channels to use as a sync down the fibre, im not 100 though, but you should at least be able to see the signal going out of your desk ? it may apear as a sub mix or group, i have never used an 01 with an adat card so i don't know, only a spirit 328
Ive had an 01v and a 328xd in me time....
You dont need to use a sync cable with ADAT.
You dont need to 'free one of the 8 channels'.
The sync signal is sent separately through a non audio part of the lightpipe signal.
All you need to do is configure your echo as the sync master (set it to 'internal sync', and configure the 01v sync source to external, ADAT.
hth
b
help setting adat outs on desk please - dsp - 19th November 2004
scope Wrote:Ive had an 01v and a 328xd in me time....
You dont need to use a sync cable with ADAT.
You dont need to 'free one of the 8 channels'.
The sync signal is sent separately through a non audio part of the lightpipe signal.
All you need to do is configure your echo as the sync master (set it to 'internal sync', and configure the 01v sync source to external, ADAT.
hth
b
fair enough just a few people i know have had to use the sync cable because of audio glitchs i just assumed it was the norm, the emu has the sync card for that reason , maybe its just the older gear
help setting adat outs on desk please - markgabba - 22nd November 2004
and i have just noticed that i have no master chanel or effects in cubase... thats can't be right can it